Current Voltage Logger

Kyoritsu KEW 5020

• ✓ The channel inputs for the simultaneous recording of Leakage Current , Load Current and Voltage
• ✓ KEW 5020 is a Data Logger capable of measuring Leakage Current, Load Current and Voltage.
• ✓ KEW 5010 is for measuring Leakage Current and Load Current
• ✓ Following sensors are used for measuring current & voltage
• ☑ Leak/Load Current Clamp Sensor
• ☑ Load Current Clamp Sensor
• ☑ Voltage Sensor (for KEW5020)
• ✓ TRMS measurement & recording of AC Current (50/60Hz) & AC Voltage (50/60Hz, only on KEW5020)

Feature

• 💫 LED to indicate pre-set current/ voltage value is exceeded. (Trigger/ Capture Recording, Power Quality Analysis modes)
• 💫 Can store 60,000 data when using 1ch, and when using all 3ch, can store 20,000 data at each channel. (Normal recording mode)
• 💫 Data will not be lost at battery replacement or at low battery voltage as it is stored in nonvolatile memory.
• 💫 Long time recording is available by a use of external AC Adaptor (optional parts)
• 💫 Installed batteries enables backup at a temporally electricity failure. Size AA Alkaline Battery: about 10-day measurement.

⏬ Download

📑 Datasheet  | 📒 Instruction Manual  |  💽 Software  |  USB Driver

• ✍

• 💫 Can transfer the recorded data to PC via USB cable. Protected throughout by double (reinforced) insulation
• 💫 This instrument provides 3 Recording modes and Power Quality Analysis mode (only KEW5020). Various insulation monitoring are available with 4 recording modes. Understand characteristic of each recording mode and select an appropriate mode.

#

Spectification

Technical Data